Skip to main content
Version: 4.6.x

Create PersistentVolumeClaim

This document provides step-by-step instructions to create a PersistentVolumeClaim (PVC) using a Local PV Hostpath StorageClass. It also explains how a PVC can carry its own configuration through an annotation.

Create a PVC​

Save the following as local-hostpath-pvc.yaml, updating storageClassName if you are using a StorageClass other than the default openebs-hostpath:

kind: PersistentVolumeClaim
apiVersion: v1
metadata:
  name: local-hostpath-pvc
spec:
  storageClassName: openebs-hostpath
  accessModes:
    - ReadWriteOnce
  resources:
    requests:
      storage: 5Gi

Create the PVC:

kubectl apply -f local-hostpath-pvc.yaml
note

Local PV Hostpath supports the ReadWriteOnce access mode only. A PVC that requests any other access mode is not provisioned.

Verify the PVC​

kubectl get pvc local-hostpath-pvc

The PVC remains in Pending state until an application pod that uses it is scheduled:

NAME                 STATUS    VOLUME   CAPACITY   ACCESS MODES   STORAGECLASS       AGE
local-hostpath-pvc   Pending                                      openebs-hostpath   21s

This is expected. Local PV Hostpath StorageClasses use volumeBindingMode: WaitForFirstConsumer, because the volume directory has to be created on the node where the application pod runs. Kubernetes selects that node first, and the provisioner then creates the volume there.

Once a pod using the PVC is scheduled, the PVC is bound:

NAME                 STATUS   VOLUME                                     CAPACITY   ACCESS MODES   STORAGECLASS       AGE
local-hostpath-pvc   Bound    pvc-864a5ac8-dd3f-416b-9f4b-ffd7d285b425   5Gi        RWO            openebs-hostpath   3m

Refer to Deploy an Application for deploying a pod that uses this PVC.

Configure a Volume Using PVC Annotations​

In addition to the settings on the StorageClass, an individual PVC can supply configuration through the cas.openebs.io/config annotation. This is useful when one volume needs a setting that differs from the rest of the volumes provisioned by the same StorageClass.

The annotation takes the same entries as the StorageClass annotation. For example, to create the volume directory of this one volume with 0770 permissions:

kind: PersistentVolumeClaim
apiVersion: v1
metadata:
  name: local-hostpath-pvc
  annotations:
    cas.openebs.io/config: |
      - name: FilePermissions
        data:
          mode: "0770"
spec:
  storageClassName: openebs-hostpath
  accessModes:
    - ReadWriteOnce
  resources:
    requests:
      storage: 5Gi
note

The configuration on the StorageClass takes precedence. A PVC annotation only applies for the parameters that the StorageClass does not already set, so it cannot be used to override a value that the StorageClass defines.

In the example above, the 0770 mode is applied only if the openebs-hostpath StorageClass does not set FilePermissions itself.

BasePath in a PVC Annotation​

BasePath supplied through a PVC annotation is ignored by default. Because a PVC can be created by any user with access to a namespace, allowing it to choose a directory on the node would let that user place volumes outside the location the cluster administrator intended.

If you need the earlier behaviour, the provisioner can be started with the --allow-insecure-pvc-basepath-override flag, which is exposed through the Helm chart:

localpv-provisioner:
  localpv:
    allowInsecurePvcBasePathOverride: true
warning

Enabling this option allows a user who can create PVCs in any namespace to choose the directory on the node where the volume is created. Leave it disabled unless you specifically need it, and set BasePath on the StorageClass instead.

Support​

If you encounter issues or have a question, file a Github issue, or talk to us on the #openebs channel on the Kubernetes Slack server.

See Also​