Installation
This section explains the prerequisites and installation requirements to set up OpenEBS Local Persistent Volumes (PV) backed by LVM Storage.
Prerequisites
Before installing the LVM driver, make sure your Kubernetes Cluster must meet the below prerequisite:
- All the nodes must have lvm2 utils installed and the dm-snapshot kernel module loaded.
Setup Volume Group
Find the disk that you want to use for the LVM, for testing you can use the loopback device.
truncate -s 1024G /tmp/disk.img
sudo losetup -f /tmp/disk.img --show
Create the Volume group on all the nodes, which will be used by the LVM Driver for provisioning the volumes.
sudo pvcreate /dev/loop0
sudo vgcreate lvmvg /dev/loop0
In the above command, lvmvg is the volume group name to be created.
Installation
Refer to the OpenEBS Installation documentation to install Local PV LVM.
Support
If you encounter issues or have a question, file a Github issue, or talk to us on the #openebs channel on the Kubernetes Slack server.